Safety and Warnings
01. Warnings
1. Do not connect or disconnect with wet hands as it will cause short circuit or
eletronic shock.
2. Please keep the fan in a steady state when in use.
3. Do not place this product on high and uneven countertops or floors, avoid
any falling damage.
4. Do not use the power supply beyond the product load, as this may cause
overheating and cause the circuit board to burn out.
5. Do not disassemble or modify this product by yourself.
6. Do not hit or throw the product as there is a danger of causing internal
damage to the body.
7. Do not put your fingers or other objects into the fan net frame.
8. This product is not suitable for children to use unattended.
9. Do not attempt to physically vertically/horizontally oscillate the fan. Ensure
you use the control methods enclosed in this manual for automatic oscillation.
※
※
02. Safety Caution
1. Please read the user manual carefully before using.
2. Do not allow children to operate the fan without supervision.
3. Do not place the fan near fire areas or high temperature areas.
4. Do not place the fan in direct radiation of strong light or hot air.
5. Do not use wet hands to operate the fan.
6. Do not use the fan near flammable gases or explosive materials.
7. Do not place the power wire under carpet to avoid fire caused by power line breakages.
8. Do not cover the fan head when in use.
9. Do not place the fan near wet areas such as bathrooms or swimming pools.
10. If the appliance is not in use for a long period of time, please cut off the power removing
the plug from the socket.
11. Any repairs or maintenance on the fan should be carried out by professional
maintenance personnel.
12. This product has not been designed for purposes other than the function specified
in this manual.
Cleaning and Maintenance
Warning
：
Before cleaning, please turn off the power switch and remove the plug from
the socket. Do not spray water or spray mist directly on to the fan.
Cleanable
Parts
:
Use a screwdriver to remove the screws between the front grill and
the rear grill. Use a soft cloth or sponge with a neutral detergent to wipe the exterior.
Ensure the parts are dry before reassembling. See below image for guidance:
Use a soft damp cloth to clean the surface. Only use warm water to clean.
Storage
Cleaning
of
external
non
detachable
parts
If product is not used for a long time, clean it and dry it, then put it into the original
packing box and store in a dry place
.
Fault Analysis and Solution
Fault
Reason
Methods
Indicator light or LED
screen not working or
no wind circulating.
The
power plug is not
plugged in
properly
.
Check the power plug and/or
socket.
To the remote control
is not working.
The battery is out of/low in power.
The battery is not properly installed.
The remote control does not
point to the receiver position or
is out of the control distance range.
Change the battery.
been
installed properly.
Check the battery has
Point the controller to the receiver
position.
Abnormal noise when in use.
The fan head has not been
assembled properly.
The fan blades are not fixed
in position correctly.
The fan cover and blades are
touching.
Ensure the fan head is installed
correctly, use this manual for
Ensure the cover and fan blades
are installed correctly and are not
touching.
Wind speed reduction.
There is a build up of dust on the
blades and net.
Remove the dust with a damp
wet cloth.
If the problem can not be eliminated
,
please contact our local after
-
sales
service
department.
Do not disassemble and repair by yourself.
Ensure you are within the control
distance range of 6M.
reference.
-10-
-9-
