DEVOLA 1.5KW GLASS PANEL HEATER, Operating Instructions Manual

Page: 4 / 10

n The wall brackets supplied with the heater must be used. The heater should be
positioned observing the minimum clearances stated around the heater – see Fig. 1
n First remove the wall bracket from the rear housing. Unscrew the 2 screws located
on the top of the 2 vertical bars of the wall bracket (See Step1). Then pull out the
top bar by pressing firmly both upper parts slotted into the rear housing (see fig 2)
n Slide down the wall bracket in order to remove it from the rear housing. (See fig 3)
n Fix the wall bracket securely to the wall through the 4 screw holes provided.
n Raise the heater to upright position; Present the heater and engage 2 slots of the
bottom parts of the wall brackets in the wall heater’s rear enclosure then pull up the
heater. Then engage 2 slots of the upper parts of the wall bracket and tighten the 2
screws in order to lock the device.
OPERATION
Control Panel Instructions
n Symbol instruction
Symbol Function
ON / OFF
MODE Mode setting
- “-“ key
+
“
+
” key
P PROG MODE (set the heater with programs)