The Bluetooth interface connects easily with any Bluetooth streaming device (such as a smartphone, tablet
or MP3-player). Use password
0000
to connect your streaming device with the speaker.
Volume, EQ, Echo and Mic
The volume knob of the unit is used to change the master volume of the unit. Turn it clockwise and the
volume will increase. Turn it counter-clockwise and the volume will decrease.
The built-in equalizer is used to change the sound characteristics of the speaker. The Treble knob is used to
increase or decrease high tones. The Bass knob is used to increase or decrease low tones.
This way you can adjust the sound for different venues. If you use the speaker for presentation or speech
purposes, you can boost the high frequencies. If you want to play music that contains lots of low frequencies,
you can turn up the bass indicator.
Please pay attention to the audio reproduction of the speaker. If you hear any crackling or distorted sounds,
the speaker is performing beyond its maximum capacity. Turn the volume down to avoid possible permanent
damage. Warranty is void when any defects are found, caused by improper use.
Use the Echo knob to add some echo to the microphone signals. This function is mostly used for karaoke
and speech purposes. Feel free to experiment with the amount of echo.
The Mic knob is used to increase or decrease the microphone level of all connected microphones.
Mic, instrument and line connections
It is possible to plug in extra audio-devices, such as MP3-player, wired microphones or even semi-acoustic
or electric guitars.
-
MIC1/Guitar input
This input has a 6.35 mm jackplug connector and is suitable for most wired microphones and instruments.
- MIC2 input
This input has a 6.35 mm jackplug connector and is suitable for most wired microphones.
- Line in
This input is used for additional line audio sources, such as PA-mixers, MP3-players, tablets, smartphones or
laptops and is equipped with stereo cinch (RCA) connectors. Adapter cables to other stereo connectors
(XLR, 6.35 mm jack and 3.5 mm mini jack are available at your local Devine dealer.
- Mix Out
This output is suitable to link this unit with multiple NORDO 12 units, for compact PA-venues. The mixed
output of all signals will be transferred to another unit.
Wireless microphone section
This section is all about the wireless microphones. The green and yellow LED show if there is a connection
between the receiver and the transmitter. The volume of each microphone is adjustable, for optimal
performance. The wireless microphone section has an on/off switch to save energy while operating with the
internal battery.
Antenna section
These retractable antennas are used for the wireless microphones. They are retractable for your
convenience and they can be positioned freely. For the best reception Devine recommends to place the
antennas in a 90 degree angle V-shape, positioned as high as possible for optimal reception and signal
quality.
DC 12V
These connection terminals are suitable for cables with bare wire. This makes it possible to connect any low-
power 12V DC devices to your NORDO 12, such as small LED devices, small cooling fans, decoration
lasers, cigarette plug gadgets, etc.
Low voltage
When using the speaker in battery powered mode, it is possible that the MP3 display will flicker when the
battery voltage is too low. If this situation occurs, turn the device off and connect it to a suitable wall outlet
power source.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 2.0
Creation date + author initials: 10-07-2013 RV Revision date + author initials: 20-02-2014 RV
