Devine MPS 1000 User Manual Download Page 3

Safety instructions

Everyone involved with the installation, operation and maintenance of this device must:
- Be qualified
- Be skilled
- Have read the instructions in this user manual
- Be sure that neither the device nor the included accessories are damaged. Should the device or the 
included accessories be damaged, please contact your dealer for more information. 
- Ensure that the device is in good working condition and is safe to operate. Please follow the advice and 
instructions as they are described in this user manual. 

Damage caused by misuse and/or modifications made to the device are not covered by the warranty. 
This device does not contain any parts that need to be repaired or replaced by the user. Should maintenance
or repairs be necessary, they must be handled by a qualified technician. 

Important information regarding safety and health: 

- Do not remove any labels or stickers from this device.
- Do not allow any cables to lie about.
- The device should not be opened up, and any hardware or software that may be present should not be 
modified.
- The inputs on the device should not be fed with a signal higher than necessary to achieve optimal 
performance.
- The device should only be used indoors; contact with water, rain and moisture should always be avoided. 
Do not place any objects containing liquid on top of the device. 
- Remove any nearby flames or heat sources; do not place the device near flammable fluids, gasses or 
objects. 
- Disconnect this device from the power supply if it will not be used for a longer period of time, if maintenance
is necessary, or if the device needs to be cleaned. 
- Do not pull on the cable to remove a connector, as it can cause damage. 
- Do not use any cables other than the ones described in this manual. Do not use defective cables. Please 
contact your dealer if the included or necessary cables do not function properly with this device. 
- In the event that the device is exposed to extreme temperature changes (e.g. transported through a cold 
outside environment into a warm indoor environment), it should not be turned on until it has reached room 
temperature. This is necessary to prevent moisture from forming in the device, which could lead to 
dangerous electric shock. 

Guidelines and operation of this device: 

- This device is intended for use by professionals on stage, in theatres, in clubs, and in similar entertainment 
locations. 
- This device is not suited for use by children, and should always be operated by an adult. 
- This device may only be used in a suitable environment where no damage to the device can occur. Do not 
use the device in moist or dusty environments such as: 

- indoor swimming pools where chlorine is used
- beaches where there are sand and salt
- outside
-inside in spaces where intense heat sources are present, or where it reaches temperature levels 

The information in this user manual is subject to change at any time without notice. 

Version: 1.0 Date of creation and author's initials:26-01-2016 RV

Date of revision and author's initials:28-07-2016 RV

WARNING!

Keep this device away from moisture, water and rain to avoid the chance of dangerous electric 
shocks. 

Summary of Contents for MPS 1000









Reviews: