Safety instructions
Important:
Please note that this cable tester is only suitable to test both connection ends of
a cable, to ensure there is a connection running.
If you wish to test cables, please ensure that both ends of the cable are removed from their
source. Do not leave cables connected, as these could for example be connected to an
active amplifier output connector.
Ignoring these instructions could lead to permanent damage to this device, as well as your
audio install.
General safety information:
Everyone involved with the installation, operation and maintenance of this device must:
- Have read the instructions in this user manual
- Be sure that neither the device nor the included accessories are damaged. Should the
device or the included accessories be damaged, please contact your dealer for more
information.
- Ensure that the device is in good working condition and is safe to operate. Please follow
the advice and instructions as they are described in this user manual.
Damage caused by misuse and/or modifications made to the device are not covered by the
warranty.
This device does not contain any parts that need to be repaired or replaced by the user.
Should maintenance or repairs be necessary, they must be handled by a qualified
technician.
Important information regarding health and safety:
- Do not remove any labels or stickers from this device.
- Do not leave any cables lying around.
- The device should not be opened up, and any hardware or software that may be present
should not be modified.
- The device should only be used indoors; contact with water, rain and moisture should
always be avoided.
- Remove the device from any nearby flames or heat sources; do not place it near
flammable fluids, gasses or objects.
- Remove the battery of this device if it will not be used for a longer period of time, if
maintenance is necessary, or if the device needs to be cleaned.
- Do not pull on the cable to remove a connector, as it can cause damage.
- Do not use any cables other than the ones described in this manual.
- In the event that the device is exposed to extreme temperature changes (e.g. transported
through a cold outdoor environment into a warm indoor environment), it should not be turned
on until it has reached room temperature. This is necessary to prevent moisture from
forming in the device, which can cause electric shocks and possibly permanent damage.
Guidelines and operation of this device:
- This device is intended for indoor use by adults only.
The information in this user manual is subject to change at any time without notice.
Version:
1.0
Date of creation and author's initials:
10-03-2018 RV
Revision date and author's initials: -
