Use of the microphones
The Devine BM-400 studio microphone is suitable for most recording applications in your studio. Thanks to
the cardioid pattern, the microphone is very suitable for recording of music instruments and vocals.
The Devine BM-400 has an unidirectional (cardioid) polar pattern. This is the most used polar pattern for
most vocal and instrument recording applications. Most of the sound is captured at the front of the
microphone, while reducing pickup of sound at the sides and especially the rear. This is the best choice
when you use (studio)monitors directly behind the microphone, to avoid feedback problems when using live
monitoring.
The BM-400 microphone is equipped with a high quality condenser capsule, to record a pleasant sound.
The polar pattern and frequency response of the microphone are visible in the figures below:
The BM-400 microphone has a slight boost in the higher frequencies (around 5 to 10 kHz) for clear vocal
recording.
IMPORTANT: Phantom power
This large-diaphragm studio condenser microphone re48V phantom power from a PA-mixer, studio-
mixer, audio-interface or phantom power supply. Consult the manual of your equipment or contact your local
dealer when in doubt if your equipment is capable of providing a +48V voltage.
This microphone will not work properly when there is no 48V voltage activated. Always check this if
you suspect that your microphone might be damaged or broken.
Protect your microphone:
This Devine microphone is equipped with very sensitive electronics to provide optimal audio performance.
Make sure the microphone is not exposed to severe shocks, collision, drops from high altitude or any
situations that may cause permanent damage. Improper use of the microphone is not covered by warranty.
Always transport the microphone in the original package, or in a flightcase with proper foam inlay.
Transporting the microphone without proper protection may cause permanent damage and will not be
covered by warranty.
Positioning and using the included accessories:
The BM-400 includes a stand and windscreen for optimal audio performance. The included stand is ideal for
desktop applications. It is possible to loosen the top of the microphone clip to mount the microphone on
larger microphone stands. The stand is equipped with 3/8” thread, the microphone clip is equipped with 5/8”
thread. The stand comes pre-mounted and a thread adapter is included, for optimal compability with your
microphone accessories.
The included windscreen is optional and is mostly used when recording outdoor. The windscreen breaks up
airflow, which prevents distortion.
Any information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Creation date + author initials: 27-01-2014 RV Revision date + author initials: 27-01-2014 RV