Page 4 SB-6-176
MAINTENANCE – DESICCANT DAD-1
1.
Replace the desiccant when the hu-
midity indicator changes to a pink
color. Remove the pipe plug at the
bottom of the tank. Allow the mate-
rial to drain into a two (2) gallon or
larger container.
2.
Once all the material has been re-
moved, replace the pipe plug (see
"Note" following) and tighten securely
(air tight).
Note
Use Teflon tape on pipe plug
threads and all threaded fittings
to facilitate removal in the fu-
ture. Do not use loctite or any
material that may bond and make
removal difficult.
WARRANTY
This product is covered by DeVilbiss' 1 Year Limited Warranty. See SB-1-000 which is
available upon request.
3.
Replace the DAD-3 humidity indica-
tor paper (supplied with DAD-1 Des-
iccant) by removing the DAD-400
humidity indicator. Pry out the old
paper and push in the new paper
(printed side facing away from the
glass).
4.
Remove the pipe plug on top of the
unit.
5.
Using a funnel (suppplied with desic-
cant), fill the unit using DeVilbiss
Desiccant Material Part No. DAD-1
(19-0831) until full.
6.
Replace the pipe plug (see "Note"
above) and tighten until air tight.
7.
The humidity indicator will return to
a blue color within five minutes.
8.
The desiccant material should be dis-
posed of properly.
9.
Refer to the appropriate service
bulletin for checking the filters and
components.
Note
A desiccant Tune-Up Kit Part No.
DAD-600, is available. Contains the
following parts to completely
recondition a desiccant air station:
Part No. Description
Qty.
Supplied
DAD-1
Desiccant
1
DAD-3
Humidity Indicator
1
HAF-6
#1 Filter Element
1
and O-Ring
HAF-507 Whirlwind Filter
1
DEVILBISS WORLDWIDE SALES AND SERVICE LISTING - www.devilbiss.com
INDUSTRIAL FINISHING
DeVilbiss has authorized distributors throughout the world.
FOR TECHNICAL ASSISTANCE OR THE DISTRIBUTOR NEAREST YOU,
CALL TOLL FREE 1-888-992-4657 (U.S. AND CANADA ONLY).
FOR LOCAL CALLS, SEE LISTING BELOW.
U.S./Canada Sales & Customer Service Office
Address
Telephone No.
Glendale Heights, IL 60139
195 Internationale Blvd.
(630) 237-5000
Toll Free Fax No. 1-877-790-6965
AUTOMOTIVE FINISHING
DeVilbiss has authorized distributors throughout the world. For equipment, parts and service, check the Yellow Pages under "Auto-
mobile Body Shop Equipment and Supplies".
FOR TECHNICAL ASSISTANCE OR THE DISTRIBUTOR NEAREST YOU, CALL TOLL
FREE 1-800-445-3988 (U.S. ONLY).
FOR LOCAL CALLS, SEE LISTING BELOW.
U.S. Customer Service Office
Address
Telephone No.
Maumee, OH 43537
1724 Indian Wood Circle
General Inquiry (419) 891-8100
Toll Free Fax No. 1-800-445-6643
2/01
©Copyright 2001, DeVilbiss Printed in U.S.A.