4
D20457 Rev. 0 3/14/00
ASSEMBLY
1.
Replace the current lance on your
pressure washer with the water
broom wand.
2.
Connect lance to water broom.
OPERATION
1.
Start the pressure washer as
outlined in the Owner’s manual
supplied with the unit.
or
STAND ON A STABLE SURFACE
AND GRIP GUN/WAND FIRMLY
WITH BOTH HANDS. EXPECT
THE GUN TO KICK WHEN
TRIGGERED.
2.
Depress the trigger on the gun to
begin spraying. Release trigger to
stop spraying.
DO NOT stop spraying wa-
ter for more than two min-
utes at a time. Pump oper-
ates in bypass mode when
spray gun trigger is not
pressed. If pump is left in
bypass mode for more than
two minutes internal com-
ponents of the pump can be
damaged.
3.
Guide water broom over surface to
be cleaned.
NOTE:
It may be
necessary to pretreat area to be
cleaned with chemical/soap.
Quick Connect on
Lance
Quick
Connect
Plug on
Water
Broom
OPERATING INSTRUCTIONS
