Page 6
SB-2-193-G
TROUBLESHOOTING (continued)
CONDITION
CAUSE
CORRECTION
Thin, sandy coarse finish drying
before it flows out
Thick, dimpled finish "orange peel"
Gun too far from surface.
Too much air pressure.
Improper thinner being used.
Gun too close to surface.
Air pressure too low.
Improper thinner being used.
Material not properly mixed.
Surface rough, oily, dirty.
Check distance. Normally approx. 6-8".
Reduce air pressure and check spray
pattern.
Follow paint manufacturer's mixing instrs.
Check distance. Normally approx. 6-8".
Too much material coarsely atomized.
Increase air pressure or reduce fluid flow.
Follow paint manufacturer's mixing instrs.
Follow paint manufacturer's mixing instrs.
Properly clean and prepare.
MSP-524
Twin Cartridge,
Paint Spray
Respirator
N I O S H - C e r t i f i e d
(TC-84A-1623) for
respiratory protection
in atmospheres not
immediately danger-
ous to life.
GTI-5033-100 & GTI-5033-2000
Air Cap Test Kits
The purpose of this test kit is to measure air
cap atomizing air pressure at the center air
port of the air cap. Used to confirm code
compliance and as a daily quality control
measure.
Joins any single
piece DeVilbiss air
cap with latest
version MBC-368,
MSA-1 or GTI-3
retaining rings.
Helps prevent
parts loss and
provides easier
assembly.
JGA-156-K10
Spring Clips
ACCESSORIES
5/02
©Copyright 2002, DeVilbiss
Printed in U.S.A.
Automotive Quick Connects For HVLP Guns (Air)
High Flow Type.
HC-4720
Coupler
1/4" NPT(F)
HC-1166
Stem
1/4" NPT(M)
HC-4419
Stem
1/4" NPT(F)
HC-4719
Coupler
1/4" NPT(M) /
NPS(M)
DeVILBISS WORLDWIDE SALES AND SERVICE LISTING - www.devilbiss.com
INDUSTRIAL FINISHING
- DeVilbiss has authorized distributors throughout the world.
FOR TECHNICAL ASSISTANCE OR THE
DISTRIBUTOR NEAREST YOU, CALL TOLL FREE 1-888-992-4657 (U.S.A. AND CANADA ONLY). FOR LOCAL CALLS, SEE LISTING BELOW.
U.S./Canada Sales & Customer Service Office
Address
Telephone No.
GLENDALE HEIGHTS, IL 60139
195 Internationale Blvd.
(630) 237-5000
Toll Free Fax No. 1-877-790-6965
AUTOMOTIVE REFINISHING
- DeVilbiss has authorized distributors throughout the world. For equipment, parts and service, check the
Yellow Pages under "Automobile Body Shop Equipment and Supplies".
FOR TECHNICAL ASSISTANCE, CALL TOLL FREE 1-800-445-3988
(U.S.A. ONLY). FOR LOCAL CALLS, SEE LISTING BELOW.
U.S. Customer Service Office
Address
Telephone No.
MAUMEE, OH 4353
1724 Indian Wood Circle
(419) 891-8100
Toll Free Fax No. 1-800-445-6643
KK-5060 Air Cap
Cleaning Kit
Consists of: 2 brushes,
1 wire pick. Helps
keep air cap clean and
performing properly.
WR-103 Wrench
Contains all necessary tip,
hose and nut sizes used
on or with gun.
HARG-510
Air Regulator
Use to maintain
nearly constant
outlet pressure
despite changes in
inlet pressure and
downstream flow.
WARRANTY
This product is covered by
DeVilbiss' 1 Year Limited Warranty. See SB-1-000 which is available upon request.
Industrial Quick Disconnect Approved For
HVLP Guns (Air)
High Flow Ball and Ring Type.
HC-4700
1/4" NPT(M)
HC-1166
1/4" NPT(M)
HC-4419
1/4" NPS(F)
HC-4699
1/4" NPT(M)
HAF-507
Whirlwind™
In-Line Air Filter
Removes water,
oil, and debris
from the air line.
Spray Gun
Lube SSL-10
(2 oz. bottle)
Compatible with all
paint materials; con-
tains no silicone or
petroleum distillates to
contaminate paint.
MSDS Sheet available
upon request.
HAV-500 OR HAV-501
Adjusting Valve
(HAV-501 SHOWN)
HAV-500 does not
have pressure gauge.
Use to control air
usage at gun.
192212 Professional Spray
Gun Cleaning Kit
Contains six precision
tools designed to effec-
tively clean all DeVilbiss,
Binks, Finishline and other
brand spray guns.
192218 Scrubs
®
Hand Cleaner Towels
Scrubs
®
are a premoistened hand
cleaner towel for painters, body men
and mechanics that go where you go
and no water is needed.
