EN - 22
SE-DV54-HE
Display Example
Description
Mode
Set Pressure
10.0 cmH
2
O
This is a prescription setting which controls the operating pressure.
CPAP Mode
Delay Time
45 minutes
Selectable delay time setting. Your provider has set the delay time.
All
Delay Pressure
5.0 cmH
2
O
This is a prescription setting which controls the operating pressure
during the delay time.
CPAP Mode
Tubing Length
1.8 m (6 ft)
The standard tubing length supplied with the device is 6 ft. (1.8 m).
However, you can adjust your device to accommodate an air supply
tubing length of 10 ft. (3.0 m). Replacement tubing can be obtained
through your home care provider (part numbers listed at the end of this
manual).
All
SmartFlex Menu
Press
Pressing the down key enters the SmartFlex menu. Refer to SmartFlex
Menu section for details
All
Enable Menu
Press
Pressing the down key enters the Enable menu. Refer to next section
for Enable Menu details.
All
LCD Contrast Adj
50 %
This setting changes the contrast for the LCD display. This only needs
to be adjusted if you find it difficult to see the display from your viewing
angle.
All
Compliance Meter
123456.7 hours
The total number of hours (in 1/10 hour increments) that the device has
been providing therapy.
All
Hourmeter
HD123456
The total number of hours (in 1/10 hour increments) that the device has
been in operation.
Firmware Version
V0.19 21/08/2009
Shows version of installed firmware.
All
Serial Number
HD123456
Shows the serial number of the device.
All
Adherence Score
83% (25/30)
Shows the maximum adherence achieved for any period of thirty
consecutive days of use within a ninety-day time frame. The score
represents the percentage of days, within thirty consecutive days, where
usage met or exceeded the ‘Usage Threshold.’
All
SmartCode
1-Day
F6CD-37F-357R
SmartCode
7-Day
3CCC-377D-7J7X
SmartCode
30-Day
DWY4-3DB7-DJ7L
SmartCode
90-Day
752TT-47DB-7DT7C
SmartCode
Usage
ZDN-79FK-K7H
SmartCode data is used for therapy management reporting. Therapy
information is encoded in a series of letters and numbers and includes a
special character for error checking to ensure accuracy. Use the UP
arrow or DOWN arrow keys to change the SmartCode reporting period.
There are five levels of SmartCode data: 1-day, 7-day, 30-day, 90-day
and Usage. Use UP or DOWN button to change between levels.
All
NOTE- If the unlocked symbol is shown, you are able to adjust this setting. If the locked symbol is shown, this setting can
only be adjusted by your provider.