background image

MODEL  NO.
DACE-7161-2

General Operation and
Parts Instructions for
Gasoline Compressor
Outfits

MGP-DAC-7161-2A   7/9/99

ENGINE HORSE POWER

11HP

COMPRESSOR  BORE

1.96/4.3

COMPRESSOR  STROKE

2.17

AIR  TANK  CAPACITY

30 GAL.

APPROXIMATE  UNLOADER  PRESSURE 175 PSIG
SCFM @ 100 psig

12.5

SCFM @ 175 Psig

12.0

This product is not equipped with a spark arresting muffler. 

 If the product will be used around

flammable materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or other similar
items, then an approved spark arrester must be installed and is legally required in the state of California. It is a
violation of  California  statutes section 130050 and/or sections 4442 and 4443 of the California Public Resources
Code, unless the engine is equipped with a spark arrestor, as defined in section 4442, and  maintained in effective
working order.  Spark  arresters are also required on some U. S. Forest  service land and may also be legally required
under other statutes and ordinances.

Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects or

other reproductive harm.

213 Industrial Dr. • Jackson, TN  38301

Summary of Contents for DACE-7161-2

































Reviews: