Instruction Booklet
2-Series
Always ensure that the scooter is switched
off before getting on or off the scooter and
before removing any items of the scooter.
Turning the scooter OFF whilst driving will
bring the scooter to an abrupt stop
6
FUNCTION OF PARTS
：
Main Key Switch (C)
1.Turn the key to the right
Turn the scooter on.
2.Turn the key to the left
Turn the scooter off.
Before driving the scooter, set the speed to low speed by turning the
knob towards turtle icon.
Drive in high speed when encounter an up slope, and drive in low speed
when encounter a down slope.
Releasing the throttle engages the automatic brake, but will taxi for a short
buffering distance, please keep safe distance when stopping to prevent any
danger.
Speed Dial Knob (D)
The rabbit icon indicates fast or high speed. The turtle
icon indicates slow or low speed. By turning this Knob
(D) towards chosen icon you can control overall speed of the scooter.
Figure 5
Horn Button (E)
Press Horn Button (E) once to sound warning tone when necessary.
Battery Gauge (F)
The LEDs represents an approximation of battery capacity. If the charge is full, all LEDs
are lit. When only red and orange LEDs are lit, the batteries are consuming and should
be charged soon. When only red LEDs are lit, charge the batteries immediately.
Self Diagnostic Warning Light (G)
Flashing light indicates there is a problem within scooter. See page 11 for more information.
Throttle (H) (H1)
To move forward by pulling the right side of Throttle (H). To move backward by pulling the
left side of Throttle (H1). (The movement directions can be reversed by local dealers if
required.) Releasing the throttle to engage automatic brake. These are also your accelerator,
the further you pull it, the faster you go. (Subject to the position of the Rabbit/Turtle control).
Figure 4
Before operation, please remove the Lock Nut (A) and
press button of Circuit Breaker (B) to activate the system.
(C)
(B)
(H)
(H1)
(E)
(D)
(F)
(G)
(A)
OPERATING YOUR SCOTTER - 12Ah
