deView electronics MD3CL12H4-9, Instruction Manual

Page: 1 / 3

INSTRUCTION MANUAL
VARIFOCAL DOME CAMERA
MD3CL12H4-9 Color NSTC Hi Resolution DC12V
MD3CL12M Color NTSC STD Resolution DC12V
FEATURES
Compact and Light weight design.
Integrated 4-9mm Vari-focal Direct Drive Lens allows
for Easy installation and adjustments.
Hi-speed F1.6 Iris provides excellent low light
performance.
DSP controls for Back Light Compensation, White
Balance, and Gain Control .
Manual pan/ tilt mechanism.
Can be installed on a wall or a ceiling.
Video cable with BNC included.
PRECAUTIONS
1. Do not attempt to disassemble the camera. To prevent electric
shock, do not remove screws or cover. There are no user
serviceable parts inside. Refer servicing to qualified service
personnel.
2. Handle the camera with care. Do not abuse the camera. Avoid
striking or shaking it. Improper handling or storage could damage
the camera.
3.
Do not expose the camera to rain or moisture, or try to operate it in
wet areas. Do take immediate action if ever the camera does
become wet. Turn power off and refer servicing to qualified service
personnel. Moisture can damage the camera and also create the
danger of electric shock.
4.
Never face the camera toward the sun. Irrespective of whether the
camera is in use or not, it should never face it toward the sun. Do
use cautiously when operating the camera in the vicinity of
spotlights or other bright lights and light reflecting objects.
P1
5. Do not operate the camera beyond its temperature, humidity or
power source ratings. Do not use the camera in an extreme
environment such as high temperature or humidity. Use the camera
under conditions where temperatures are within –5
℃ ~ + 45 ℃ , and
humidity is below 80%.
6.
Do not touch the CCD sensor directly with your fingers. If necessary,
use soft cloth moistened with alcohol to wipe off the dust.
7.
When the camera is not in use, ensure the lens is kept properly in
place to protect the CCD sensor.
PART DESCRIPTION
INSTALLATION
1. Creating a Hole in the Ceiling or Wall
Make three holes for the screws affixing the camera body, and
additional one hole for the power and video cables. Use the
supplied template to mark the appropriate mounting position on the
ceiling or the wall.
P2
Cover Removal and Attachment
To remove the bubble, rotate counter
clockwise and pull lightly. To attach it,
put inner cover into bubble, align lens
into the slot of inner cover, then insert
bubble into camera body and rotate
clockwise lightly until it snaps
together.
When removing the camera and
gimble from chassis, make sure the
slot is parallel with base. Pull and
insert lightly.
If wall mounting remove the bubble as
above, after taking the camera and
gimble from the chassis remove the
camera from the gimble and turn
through 90
° and replace. (TOP of
camera is indicated on camera cradle).
DC jack power
Coaxial video cable
Bubble Camera body