13
SWITCHER
4.1.2.3 T
ransition Effect Control Area
There are 3 transition modes:
MIX transitions, FADE, and Wipes, where the Wipes
include: up, down, left, and right.
You can also press MIX (showing green light) in the key panel, then press the "up and down" buttons of
the menu button to enter the audio channel selection, press the "down" button to enter the CH1 channel,
click "MENU" to enter the audio source selection, audio The source can be selected from
IN1
、
IN2
、
IN3
、
IN4
、
PHONE_IN
、
MIC_IN1
、
MIC_IN
, after confirming the selection, press "MENU" to exit; as shown in the
right figure, the audio source of the first channel is from IN1-HDMI1 becomes IN4-HDMI4.
The second audio selection operation is the same. As shown in the right figure, the audio source of the
second channel has changed from IN2-HDMI2 to MIC_IN1.
Note: When there is a white bar displayed in the menu, you can only exit by pressing the "up" button on
the key panel, and you can only operate the operating system menu after exiting
4. The volume adjustment of the audio mixing mode is controlled by the buttons on the operation panel;
press the MIX button (showing green light) in the mixing mode. At this time, you need to increase or
decrease the volume, just operate VOL+ (increase volume) and VOL- (decrease volume) button to adjust.
Keep clicking the VOL+ and VOL- buttons, and the corresponding menu part can also display the current
volume value.
