Manual Mode
Phone 1800 636 091 • Email [email protected] • Web www.devi.com.au
Devireg
™
535
Programming Instructions
Program Mode
Program 2
A weekly program that turns your heating on in the morning and evening.
Your heating will be off during the day and the night.
Program 3
A weekly program that turns your heating on in the morning, day and evening.
Your heating will be off during the night.
Program 4
A weekly program that combines Program 2 and Program 3.
Monday to Friday will be on Program 2 (Morning & Evening – best for days at work);
Saturday and Sunday will be on Program 3 (Morning, Day, Evening – best for days at home).
Program 1
The temperature is maintained constantly 24 hours a day, 7 days per week. You can turn your
temperature up and down as you please and manually turn it on and off when required.
1
Select
manual mode
Hold in the Select (•) button until the screen starts flashing. Use the arrows (
) to find P1 then press the Select (•)
button to save.
2
Set the
comfort
temperature
The comfort temperature can be adjusted to meet your requirements. Typically this will be around 21°C (room sensor) or
4-5 (floor sensor). To change the temperature, press the arrows (
) to decrease or increase it. When finished, press
the Select (•) button to save.
3
Turn on/off
To turn off the heating, simply press the on/off button on the left hand side.
1
Set the time
Using a pin or pencil press in the “Settings” button. A digital clock will appear on the screen. To change the time,
press the Select (•) button. Notice how the hours are flashing. Use the arrows (
) to change the time. When you
have the correct hours, press the Select (•) button to save. Notice how the minutes are flashing. Use the arrows (
)
to change and then press the Select (•) button to save when finished. The time should now be correct and nothing
should be flashing. Now move on to the next screen by using the right hand arrow (
).
2
Select
the day
On the top of the screen you will notice 7 lines. These represent the day of the week with the very left one being
Monday and the very right one being Sunday. The current day of the week is underlined. To change the day, press the
Select (•) button and then use the arrows (
) to select the correct day. Press the Select (•) button to save.
Next, press the (
) arrow to be taken to the next step
3
Program
your times
A 24-hour day is broken into 4 periods (“Morning”, “Day”, “Evening” & “Night”) and is represented by 4 bars at the
bottom of the screen. The first bar (“Morning”) is flashing while its pre-programmed start time of 06:00am is displayed
in the centre of the screen. If no change is required, use the arrow (
) to move to the next time period. Alternatively,
to change this start time, press the Select (•) button followed by the arrows (
) until the desired time is displayed.
Then press the Select (•) button to store the new start time and to move on to the next time period. Repeat this step
to review or change the start time of the 2nd (“Day”), 3rd (“Evening”) and 4th (“Night”) periods. In the 4th (“Night”)
period, use the arrow (
) or press the Select (•) button to store changes, and you will be taken to the next screen.
4
Set the
comfort
temperature
The comfort temperature can be adjusted to meet your requirements. Typically this will be around 21°C (room
sensor) or 4-5 (floor sensor). To change the temperature, press the Select (•) button and then use the arrows (
)
to decrease or increase it. When finished, press the Select (•) button to save. Move on to the next screen by pressing
the right hand arrow (
).
5
Set the
savings
temperature
The Savings Temperature allows you to never let the temperature fall below a certain set point. You might, for
instance, set this temperature at 15°C (or “2” for floor sensing) so that the floor never gets too cold. To change the
Savings temperature, press the Select (•) button and then use the arrows (
) to decrease or increase it and press
the Select (•) button to save. Alternatively, you can choose “off” and ensure that it is always off when heating is not
required by decreasing (
) the termperature all the way down. If you have chosen floor and room sensing mode, you
will be asked to set a minimum floor temperature. We recommend to leave this blank. Press the “Settings” button with
a pencil to go back to the original screen.
6
Select
program
Hold in the Select (•) button until the screen starts flashing. Use the arrows (
) to find P2 or P3 or P4 then press
the Select (•) button to save.
The thermostat comes pre-configured with the following factory settings:
Morning
06:00 - 08:00
Day
08:00 - 16:00
Evening
16:00 - 22:30
Night
22:30 - 06:00
Should these settings be acceptable to you and the time and day settings have been correctly set up by the installer, simply go to Step 6 below to
choose one of the program modes. Otherwise start at Step 1.
The comfort temperature and the savings temperature can be adjusted to suit as in Step 2 above, during the appropriate time period.
BROCDEV002.4
