E-3
III.Installation Procedure
1. Visually inspect the outside of the Paper feeder
unit, and remove locking tapes and protection
paper.
Note:
• Locking guide tapes indicate the portions to be
unlocked; those tapes should be removed after
the completion of each unlocking procedure.
• Being to be a lock tape even in the front door,with-
out forgetting, you remove.
2. Remove the locking tapes within the trays.
(1) Open the front door and remove locking tapes
of PF1, PF2, PF5 and Filter lever.
(2) Open the PF1 door and pull tray 4 out while
pushing the lock lever up on the left side of the
tray.
(3) Remove the locking tapes and the cushions
inside tray 4. Remove the locking guide tape
as the last step.
(4) Repeat procedures for tray 5 and close the
PF1 door and the front door.
3. Cut off the split covers on the right side of the
machine with a nipper. (2 plates)
(Exclusive the Printer Model)
A03XIXE002CA
Locking
tapes
Locking
tapes
Locking
tapes
Locking guide tapes
Accessory
parts
Protector
sheet
A03XIXE029SA
Front door
PF1 door
A03XIXE003SA
Locking tapes
Locking guide tape
Cushion
Cushion
A03XIXE004SA
Split cover
