Develop ineo+ 25, User Manual

Page: 208 / 340

Scanning With the Machine 7-30
Setting Duplex (Double-Sided) Scanning
Double-sided document pages can be scanned with the ADF.
d
These settings are available only if the document is loaded in the ADF.
If the document is scanned without being loaded in the ADF, [1-SIDE]
is automatically selected, and the document is scanned from the orig-
inal glass.
d
This setting is available only if [PDF] is selected as the data format for
the scan image.
1
In the main screen (Scan mode), press the + or , key to select the cur-
rent simplex/duplex (single-sided/double-sided) setting, and then press
the
Select key.
2
Press the + or , key to select [2-SIDE], and then press the
Select
key.
3
Press the + or , key to select [LONG EDGE] or [SHORT EDGE], and then
press the
Select
key.
The main screen (Scan mode) appears again.
d
For details on [LONG EDGE] and [SHORT EDGE], refer to “Duplex
(Double-Sided) Copying From the ADF” on page 6-11.
4
Specify the desired scan settings.
5
Load the document into the ADF for the front side to be scanned.
6
To scan color scans, press the Start (Color) key. To print monochrome
scans, press the
Start (B&W)
key.
The front side of the document is scanned.
7
Load the document into the ADF for the back side to be scanned, and
then press the
Select key.
The back side of the document is scanned.