FrameMaker Ver.5.5E(PC) Di152/Di183 TROUBLESHOOTING
01.09.04
T-53
(7)
Blank streaks or bands
Section Step
Check
Result
Action
Output
system
1
PC Drum ground terminal is dirty,
scratchy, deformed, or damaged.
YES
• Clean, correct, or
change.
2
DB of IU is plugged with foreign matter
(such as paper dust).
YES
• Remove foreign matter.
3
PC Drum Charge Corona grid mesh and
Comb Electrode are dirty, scratchy,
deformed, or damaged.
YES
• Clean, correct, or
change.
4
Post-fusing guide plate is dirty, scratchy,
deformed, worn, or damaged.
YES
• Clean or change.
5
PH window of the PH Unit is dirty,
scratchy, or damaged.
YES
• Clean or change.
NO
• Change IU.
Input
system
1
Original Glass is dirty, scratchy, worn, or
damaged.
YES
• Clean or change.
2
Shading sheet reading portion (the por-
tion on the backside of the Original
Glass to which Original Width Scale is
affixed) is dirty.
YES
• Clean.
3
Scanner mirrors are dirty, scratchy, or
damaged.
YES
• Clean or change.
4
CCD Unit lens and CCD surface are
dirty or scratchy.
<Check Procedure>
Remove lens cover to check for possible
contamination.
YES
• Clean or change.
5
CCD Board (copier: PWB-J) connector
is loose.
YES
• Reconnect.
6
Control Board (copier: PWB-C) connec-
tor PJ1A is loose.
YES
• Reconnect.
NO
• Change CCD Unit.
• Change Control Board
(copier: PWB-C).
Summary of Contents for D1531iD
