Develop D 1650iD User Manual Download

Page: 48 / 134

Basic Operations

3-4

D 1650iD/D 2050iD

Loading Paper Into the 1st Paper Tray

Pull out the 1st Tray.

Have the necessary precautions
been observed when pulling out
the tray?

Be careful not to touch the
surface of the Paper Take-up
Roller with your hands.

Press down on the Paper-Lifting
Plate until it locks into place.

Load the paper into the tray so that
the front side of the paper (the side
facing up when the package was
unwrapped) faces up.

Have the necessary precautions
been observed when loading
the paper?

Do not load so much paper that
the top of the stack is higher than the

mark.

Slide the paper guides against the
edges of the paper.

Is the paper guide positioned
correctly?

Make sure that the paper guides
are pushed up against the
edges of the paper.

Paper Take-up Roller

Paper-Lifting Plate

Summary of Contents for D 1650iD







































































































































Search results

Summary of Contents for D 1650iD

Reviews:

Related manuals for D 1650iD

Brands by name

Popular brands

Develop D 1650iD, User Manual

Search results

Summary of Contents for D 1650iD

Reviews:

Related manuals for D 1650iD

Brands by name

Popular brands