GetStartedGuide.md
6/3/2021
2 / 12
IoT Plug and Play Certification is certifying specific device code implementation against specific device model.
Device builders should either pre-install device code or make the binary download-able.
Capabilities of the device
The Squid.link 2X Gateway has options for ZigBee, Z-Wave, Wireless M-Bus, Bluetooth Low Energy (BLE), and
WLAN HAN networks. Communication with servers and e.g. smartphones can be established via WLAN,
Ethernet (to local modem) or cellular networks. The price is extremely competitive since you will only pay for
your selected communication modules.
The gateway includes processor power to implement even very complex local intelligence. The memory
options leave room for data storage and logging. You are no longer dependent on one vendor but can
combine your Home Area network exactly the way you prefer.
The code is pre-installed on the device. In the following steps you will find instructions on how to configure
your device.
How to setup the device and connect it to the Internet
Ways to get started – Find below two ways to connect to the Squid.link gateway and accessing the web
interface;
1. Via ethernet
2. Via WLAN
Via ethernet
Connect the gateway to your local network using an ethernet cable and apply power to the gateway. The
gateway is configured to use DHCP, so make sure a DHCP server is available on the network. Note: The
gateway should not be connected directly to the PC.
Open a browser and apply one of the following options:
