Develco Squid.link 2X Page 1 Get Started Manual Download | Manualshive

Page: 1 / 12

background image

GetStartedGuide.md

6/3/2021

1 / 12

Connect Smoke Safety Basic Kit to your Azure IoT

services

Table of Contents

Introduction
Prerequisites
Prepare the Device
Connect to Azure IoT Central
Integration with Azure IoT Explorer
Additional links

Introduction

About this document

This document describes how to connect the Smoke Safety Basic Kit to Azure IoT Hub using the Azure IoT
Explorer with certified device application and device models.

IoT Plug and Play certified device simplifies the process of building devices without custom device code. Using
Solution builders can integrated quickly using the certified IoT Plug and Play enabled device based on Azure
IoT Central as well as third-party solutions.

This getting started guide provides step by step instruction on getting the device provisioned to Azure IoT
Hub using Device Provisioning Service (DPS) and using Azure IoT Explorer to interact with device's capabilities.

Prerequisites

You should have the following items ready before beginning the process:

For Azure IoT Central

Azure Account
Azure IoT Central application

For Azure IoT Hub

Azure IoT Hub Instance
Azure IoT Hub Device Provisioning Service
Azure IoT Public Model Repository

Prepare the Device.

Development Environmental setup

1
2
3
...
»

Summary of Contents for Squid.link 2X













Reviews:

No comments

Related manuals for Squid.link 2X

Brand: Yes Pages: 2

OA5305-13maw-EU

Brand: Alcatel Pages: 4

Brand: Dragino Pages: 61

Brand: ANTIFERENCE Pages: 26

Brand: Innovaphone Pages: 164

Brand: NETGEAR Pages: 25

Brand: NETGEAR Pages: 2

Brand: engelmann Pages: 23

Brand: engelmann Pages: 24

Brand: Maverick Pages: 21

Brand: Xtream Pages: 9

Hot Spot WSG-403

Brand: Planet Networking & Communication Pages: 125

Brand: ZyXEL Communications Pages: 2

Brand: Wildix Pages: 3

Brand: ZyXEL Communications Pages: 2

Brand: AirLive Pages: 225

Brand: AWB Pages: 59

Brand: DEERE Pages: 45

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands