ESP32LR42
User Manual v1.02
USB Configuration Commands
ST Status. Return the system status
Status:
Firmware Version: 1.2
IP: 0.0.0.0 (192.168.0.30)
Subnet: 0.0.0.0
Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
SSID: ********
Password: ********
ASCII TCP Port: 17123
RSSI: -66
MQTT Server: 192.168.0.115
MQTT Port: 1883
MQTT ID: ESP32LR42
Relay1 Topic: R1Topic
Relay2 Topic: R2Topic
Relay3 Topic: R3Topic
Relay4 Topic: R4Topic
Input1 Topic: Input1Topic
Input2 Topic: Input2Topic
When the IP address is set to 0.0.0.0 this means that the IP address is being provided by
your networks DHCP server. In that case the assigned IP address is also provided, as
above.
When the SSID and Password are setup, they will be displayed until the next reset, After
that they will only show as ********.
RB ReBoot.
This will restart the module. It may produce a lot of random characters as the
ESP32’s boot logging runs at a different baud rate. If it succeeds in connecting to your
network it will report the IP address.
Re-Booting.. .
崳
⸮⸮⸮⸮⸮⸮⸮⸮
#XL###C
5)5)
ia b
⸮⸮⸮⸮⸮
⸮⸮⸮ ⸮ ⸮⸮⸮⸮⸮⸮⸮⸮
奅
#
UY o
##i#U 5
⸮⸮*⸮⸮
⸮ ⸮⸮⸮⸮⸮
⸮
**
Q
⸮ ⸮⸮⸮⸮⸮
WiFi connected.
IP address:
192.168.0.6
Copyright
© 2018,
Devantech Ltd.
All rights reserved.
4
