65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: [email protected] ,Web: www.devabroadcast.com
- 19 -
Basic Setup
ANALOG AUDIO INPUTS
Using a cable ending with two standard XLR jacks connect the analog signal source to the
analog audio inputs of DB9009-TX.
WARNING:
Do not exceed maximum input level. This may permanently damage the device.
DIGITAL AUDIO INPUTS
Using a cable ending with a standard XLR jacks connect the S/PDIF signal source to the digital
audio input of DB9009-TX.
NOTE:
As only one input can be managed by the encoder at certain point of time, please select
the preferred signal source input – either analog or digital one. Selecting the preferred input can be
performed under CONFIGURATION menu
.
LAN PORT
For normal operation it is necessary the encoder to be connected to a local network or Internet
by cable with RJ-45 connector.
RS-232 COM PORT
Using standart DB-9 cable connect DB9009-TX to any RS-232 compatible equipment.
GPI PORT
The current audio source can be selected/forced using this GPI port.
