65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: [email protected] ,Web: www.devabroadcast.com
- 15 -
NETWORK SETTINGS
After connecting the network cable the Led ‘LAN’ located on the rear panel must be ON or
flashing. The next and most important step for configuration is the adjustment procedure of the
Network Communication. The settings shown below are Default Network Settings:
DHCP
Enabled
IP
Assigned by DHCP
Mask
Assigned by DHCP
Gateway
Assigned by DHCP
DNS
Assigned by DHCP
HTTP Port
80
The DB46 is controlled trough a build in WEB Server and a standard Web browser can be used
to monitor its status or to make some adjustments. To operate the device you need to know its
IP Address. In case you are not aware of it, you can use the Network discovery feature at Local
networks.
1. Connect the device to the local network or to the Internet by LAN cable;
2.
Open a new WEB Browser and enter the device IP address in the address field then press
[Enter]. A new WEB browser with DB46’s Main window will appear;
3. To access the device’s settings press [Settings], the default values are
username
: admin and
password
: pass.
NETWORK DISCOVERY
If you have already enabled this function on your computer just open a new Explorer bar and
click on Network. The device must be displayed. If not follow the instructions below.
1. Open Advanced sharing settings by clicking the Start button, and then on “Control Panel”.
In the search box, type “network”, click “Network and Sharing Center”, and then, in the left
panel click “Change advanced sharing settings”.
2.
Select your current network profile.
3. Click Turn on network discovery, and then click Save changes. If you’re prompted for an
administrator password or confirmation, type the password or provide confirmation.
4. To access the device open a new Explorer bar and click on Network. If you have successfully
enabled the network discovery option, the device will be displayed. Double click on DB46
will open a new WEB browser with the Main window.
5. To access the device’s settings press [Settings], the default values are
username
: admin and
password
: pass.
NOTE:
If the port is different than the default one (80), it is necessary to specify it, for example:
http://192.168.1.2:9000
ATTENTION:
Depending on Internet Protocol Settings, the assigned IP address may not be
visible outside your local network, thus the device may be accessed only within that network.
Consult with your network administrator for the appropriate IP settings.
