FM
station
(s)
and IP Audio URL(s) Set-up
STEP 4
DB3010 supervises simultaneously the FM and the online stream of the radio station to ensure perfect
performance and remote monitoring. Up to 10 user presets to be set and saved in the device's memory.
The number of FM or Internet radio preset is not limited. For example, you can set 7 FM Presets and 3
Internet radio presets, or 10 FM Radio presets, and etc. There is no limitation as regards the possible
configurations. A new preset could be created via the front panel and WEB Interface. The procedure of
adding a new preset is quite simplified and explained in details below.
NOTE:
Please have in mind that if you would like a preset to be assigned to one of the four soft buttons on
the front panel menu, the preset should be set in positions 1 to 4, as these are the positions to be
used for quick access via the soft buttons.
Set-up via front panel menu
STEP 4.1
In order to set up a preset via the front panel menu, the following steps should be completed:
1. Press the [OK] button to enter the
Main menu> Tuner
and again press [OK];
2.
Then select
Input Select
-
Internet
or
FM Radio
;
3. If
FM Radio
is chosen, select
FM Radio
and press the [OK] button to enter the menu. Specify
Frequency
,
Frequency Step
,
RF Attenuator
,
IF Bandwidth
,
Deemphasis
,
RDS Mode
, and if need
be, change the default audio processing settings –
Stereo Blend
,
High Cut
,
High Blend
and
Soft
mute
;
4. If
Internet Radio
is chosen, select
Internet Radio
and press the [OK] button to enter the menu. Then,
set the URL (press the [OK] button and navigate through the letters via the [UP] and [DOWN] buttons),
specify
Decoder
,
Channels
,
Pre-buffer
,
Buffering
timeout
and
Gain adjust
;
5.
To save the newly added FM or Internet Radio, go to presets and choose one of the available presets,
or an old one and press the soft button labeled [Save]. If you choose to overwrite an existing preset,
the following message will appear: “Overwrite selected preset? OK to proceed...”. Press [OK] to save
the preset.
NOTE:
The name of the preset cannot be user-defined as it is automatically generated by the device.
When FM Radio preset is created, the name is composed of the frequency and the PS (if the
device has decoded RDS). For the Internet Radio, as a title is used the name of the URL.
Please refer to the User manual for
detailed
information on
how to
configure and
explore
your device
.
Set-up via WEB Interface
STEP 4.2
The procedure of adding a new
preset via the WEB Interface is quite
simplified. Just go to
Settings> Presets
and then specify name, or frequency, and
select the source
FM Radio
or
IP radio
from the drop down menu.
If
IP Radio
is chosen, you will have to
specify the
URL
,
Gain
,
Decoder
and
Channels
. If
FM Radio
is chosen,
Frequency
,
RF Attenuator
and
Name
should be specified.
The here specified presets could be
easily changed via the interactive buttons
placed in the Main page of the WEB
interface.
