Deutschmann Automation GmbH & Co. KG
15.08.2012
Description Developerkit UNIGATE
®
FC V1.0
5
● 1 x V3719-A Developerkit serial cable (connection cable COM <-> Developerboard UNIGATE
®
FC)
9 pole D-Sub
7 pole screw-/plug-connector (Appl. RS232)
Rx
2
1 Rx
Tx
3
2 Tx
GND 5
3 GND
● 1 x V3719-B Developerkit debug cable (connection cable COM <-> Developerboard UNIGATE
®
FC debug)
9 pole D-Sub
3 pole screw-/plug-connector (Debug RS232)
Rx
2
1 Rx
Tx
3
2 Tx
GND 5
3 GND
● 1 x V3719-C Developerkit application cable (connection cable application RS422/485 <->
Developerboard UNIGATE
®
FC)
When using the RS422 or RS485 interface, please connect one end of the cable V3719-C with
your application and the other end via the 7 pole screw-/plug-connector of the serial cable
(V3719-A) with the Developerboard UNIGATE
®
FC.
Attention: Please always use only one of the 3 application interfaces!
● 1 x V5001 USB cable 1 m
The USB cable connects the Developerboard with the PC (1
st
Appl. RS and 2
nd
Debug RS).
Alternative of V3719-A (Appl. RS232) and V3719-B (Debug RS232)!
ATTENTION: the external supply (e. g. power supply unit V3719) is imperative. Supply
via USB is insufficient.
● as well as documentation, a screwdriver and a Support CD, that contains all required software,
such as the RS232 monitor or the Protocol Developer, for simple creation of a Script for
UNIGATE
®
FC.
9 pole
D-Sub
female
Board FC
1.80 m
PC
9 pole
D-Sub
female
Board FC
1.80 m
PC
1.80 m
