4
4. Length, including bumper bar. 1859 mm.
5. Mower deck.
•
Cutting width 1400mm (54”)
•
Deck width including discharge chute. 1650 mm.
•
Number of disc blades. 3
•
Diameter of discs 335 mm
•
Blade pitch circle diameter. 485mm.
6. Cutting heights. Lowest 20mm, highest 100mm +/- 10mm.
7. Fuel capacity 16 litres and 32 litres with optional tank fitted.
8. Approximate maximum groundspeed on a hard surface, 12.0 kph.
9. Weight including the deck. 273 Kg
10. Belts. Blade drive (long) B 88S
Blade drive (short) B 50S
Wheel drive AX 61S
11. Tyres. Rear 20 x 8.00 x 8 (Kenda) Recommended rear tyre pressure 11 psi (76kPa)
Front 13 x 5 – 6 Recommended front tyre pressure 18 psi (124 kPa)
12. Battery 12 volt lead acid.
13. Blade clutch. Electric clutch, 12v,
14. Fuel type. Standard unleaded.
15. Hydrostatic transmission Hydro-Gear Model 310-2400
16. Oil type. Engine. SAE30, Hydrostatic transmission 20W50.
Specification Options
.
1. Engine. Briggs and Stratton Intek OHV
or
Honda 20Hp GXV610.
2. Seats Standard P2 KAB with backrest on B&S powered units.
U2 KAB seat with armrests on Honda powered units.
3. An adjustable backrest on the standard seat.
4. Fuel tanks, A single 16 litre tank is standard with a toolbox on the left mudguard.
Optional, 2 tanks and no toolbox.
5. A “roll over protection bar” can be supplied.
WARNING. A roll over protection bar
may prevent an injury during a roll over, but
it
may also
cause the mower to tip suddenly backwards if the mower is driven under a tree,
which has
strong branches below the height of the roll over protection bar.
A roll over is highly unlikely if the mower is driven on a slope no greater than 10 degrees to the
horizontal and if it is driven in accordance with these instructions.
