Deuba 102606, Assembly Instruction Manual, Page: 5 / 15

Following lay the cover over it.
Lift the marquee at the sides; one after
another; and put the feet on.
Therefor it will need several persons to
avoid tilting and possible damages.
When fixing the Velcro, pay attention
not to pull on it, because the cover could
take damage.
The cover has to flow around the frame
and not being frapped too tightly.
Finally you fix the cover with hooks in
the ground.
In the case of rain, snow (the formation
of water bumps for example will
inevitably lead to a breakdown of the
metal framework) or wind and/or in
cases of frost you have to disassemble
the marquee immediately, otherwise it
will take irreparable damage.
Is the roof cover to loose water bumps
can occur which will lead, like
descripted, to irreversible damages.
Please be careful because if you
fastening it to tightly, it can lead to
damages, too.
Don’t use any electric tools to assemble
this product.
The product is only appropriated for
private usage and not for any
commercial purposes!
The marquee will not provide protection
against storms, wind, snow or frost. At
upcoming bad weather situation you
have to remove the covering
immediately to avoid damages on
people and material. The marquee is
water repellent, not waterproof.
Items which are standing under it have
to be protected against water. Here we
can assume no liability for any damages!
Do not fasten screws and bolts too
much. Tighten all the screws when the
product is completely assembled.
DON’TS
5
www.Deuba24online.de
Uniquement pour usage domestique et non pour un
usagecommercial.
Uniquement pour usage domestique et non pour un
usagecommercial.