EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE
34.3 INSTALLATION OF FLYWHEEL HOUSING
Install as follows:
1. Thread two guide studs (J–43431) for 14 mm bolts, into the cylinder block to guide the
housing in place.
2. Install a new gasket.
BODILY INJURY
To avoid injury from a falling component, ensure a proper
lifting device is used. Never stand beneath a suspended
load.
3. Using a lifting sling support the
fl
ywheel housing and position it onto the cylinder block.
4. Install all of the housing bolts in their proper location;
fi
nger-tighten them.
All information subject to change without notice.
DDC-SVC-MAN-0081 2010
Copyright © 2010 DETROIT DIESEL CORPORATION
34-7
Summary of Contents for EPA07
Page 1: ......
Page 2: ......
Page 287: ...23 OIL FILTER Section Page 23 1 REPLACEMENT OF THE OIL FILTER 23 3 ...