23
EN
Radio Control Settings
The Watch automatically checks and adjusts the time at 3am UTC +1.
If unsuccessful, the signal is checked again at the start of the next hour.
After the 3rd fail, the Watch will not search again until 3am the next
day.
When the Reception is OK, the RC symbol will be displayed. During Re-
ception the RC icon will flash, and the signal quality indicator will display
when available. If a signal is received, the Watch will be set to the new
received time. If no signal is received, the Watch will continue on the old
time. By pressing Button A for more than 2 seconds, auto reception will
be cancelled and the pre-adjusted time displays.
Signal strength is indicated by the waves icon.
No waves – no signal available
1 wave – weak signal available
2 waves – good signal but some interference
3 waves – best signal available
Manual Reception Setting
You can also manually search for the time at any time by pressing
Button A for more than 2 seconds (also press Button A for 2 seconds
to cancel).