USB Connection
Internet Access
96
For further information, see
Setting up the OpenCom dial-up network access (RAS)
5.4.2 Access via a PC dial-up interface
You can set up a dial-up network to the Internet using the access information pro-
vided by your Internet Service Provider (ISP).
The connection to the ISP is established via an available B-channel. Potentially this
can be a disadvantage: if another PC also establishes a connection to the ISP,
higher costs are incurred. The second PC uses a second free B-channel since the
original connection was not made via the OpenCom integrated router.
For further information, see
Settings for an Internet connection via the PC dial-up
To guard against the creation of undesired dial-up connections, you should
activate connection monitoring in the CAPI-Control settings screen under
Security
tab, for example by checking confirm each new connection.
5.4.3 Setting up the OpenPhone 27
First requirement is the configuration of the OpenPhone 27 as type “OpenPhone
27/28 + Data”. This can be done in the OpenCom Configurator under the menu
option
PBX Configuration: Devices: DECT Phones
.
The
Telephone
and
Data
options for the handset can either have the same
number or two different internal numbers. In either case, the number(s) must be
assigned to a user via the User Manager.
Summary of Contents for OpenPhone 26
Page 1: ...OpenPhone 26 27 on the OpenCom 100 Communications System User Guide ...
Page 8: ...6 ...
Page 114: ...Index 112 Notes ...
Page 115: ......
