DETEWE OpenPhone 26, User Manual

Page: 46 / 116

Telephoning Making External/Internal Calls
44
The OpenCom 100 establishes calls to the desired subscribers either automatically
or via specific routes. Your system administrator configures these routes in the
OpenCom 100 and specifies how each route is seized. In order to manually seize a
specific route for a call, dial the routing code before dialling the (internal or
external) telephone number. By making calls via specific routes, you can e. g.
contact subscribers in the branches of a large company network. It is also possible
to use a manually-entered routing code to record your call-charge data for
external private and business calls separately.
For information on the current routes and their codes, please contact your system
administrator.
3.2.9 “Calling …” Menu
Note: Menu items marked with an * are only displayed if the
corresponding user authorisation has been set in the Config-
urator.
During a call, press the Menu softkey briefly and then select …
Hands-free on
or
Hands-free off
: Here you can activate/deactivate the
hands-free functionality. This menu point is only displayed with an OpenPhone 27.
Disconnect
: The call will be disconnected.
Phone book
: You can add the other party’s phone number to the OpenCom 100
telephone book as a new entry (
New Entry
) or you can add it to an existing entry
(
Add
). Please see: Add Phone Numbers to Phone Book from Lists or During a Call
starting on page 63.
Park call
:* You can park one or more callers to make other calls or put down the
receiver and engage in other activities. Parked calls are recorded in a list. You can
remove the calls from the list in whichever order you wish, enabling you to unpark
specific calls as required. Until his call is unparked, the caller will hear music on
hold, provided music on hold has been configured. If you do not unpark the caller
after a certain amount of time, you will receive an automatic recall if your tele-
phone is available again. This automatically unparks the caller. If, however, you are
still making another call and have not hung up, the caller will hear the busy tone
and will be “unparked”.
Authorisation for parking connections and the period of time after which there is a