Telephoning
Making External/Internal Calls
43
3.2.6 Voicebox Queries
There are various ways of listening to the messages in your voicebox:
■
via OpenVoice (from a telephone whose number is not assigned to your voi-
cebox)
■
by calling the voicebox directly (from a telephone whose number is assigned
to your voicebox)
■
by means of the additional menu
Applications
in the Main menu (see the
section entitled
Note:
For detailed information on the utilisation and opera-
tion of OpenVoice, please refer to the add-on guide
“OpenVoice 200 – The Voicemail System in the OpenCom 100
Communications System”.
3.2.7 Ending a Call
Press
A
to end a call.
If the subscriber you are speaking to ends the call, the busy tone for your tele-
phone is switched off after approx. three seconds and you can be reached again.
If the subscriber you are speaking to ends the call while you are in hands-free
mode, the busy tone for your telephone is switched off after a few seconds and
you can be reached again. This also applies if you were connected to the other
subscriber via your headset (only on the OpenPhone 27). The time frame after
which the busy tone is switched off is configured by the system administrator. All
other calls will be ended after 20 seconds if the handset is off-hook.
3.2.8 Using Routes to Make Calls
HZ
(routing code, tel. no.)
Enquiry calls:
GRZ
(routing code, tel. no.)
Summary of Contents for OpenPhone 26
Page 1: ...OpenPhone 26 27 on the OpenCom 100 Communications System User Guide ...
Page 8: ...6 ...
Page 114: ...Index 112 Notes ...
Page 115: ......