DETEWE OpenCom 510, User Manual

Page: 9 / 164

7
Features
A COM port can be used to connect a
PC for the purpose of transferring
connection data.
You can use the “Doorline” intercom
system to connect the OpenCom 510
to a building’s wiring system, which
enables you to use door opener and
doorbell functions through the
OpenCom 510.
The OpenCom 510 enables you to
use third-party CTI (Computer Te-
lephony Integration) applications.
This requires the installation of a
TAPI driver (provided on the system
CD-ROM) on a Windows PC. The
OpenCom 510 also features the inte-
grated dialling wizard OpenCTI 50
with which users can call up and use
telephone functions through their
PCs without having to install a spe-
cial TAPI driver.
Further Telephony Features
The OpenCom 510 can be used to
run digital voicebox and voice portal
systems. The configuration data and
the recorded speech files (messages
for, or left by, a caller) are stored on
the OpenCom 510 CompactFlash
card, which is installed on the
MC+1-3 central control module.
For further information, refer to the
“OpenVoice” and “OpenAttendant”
user guides.
You can optimize telephone commu-
nication with the help of team func-
tions and the call-queueing func-
tion.
The “OpenCount” application, which
requires a separate licence, can be
used to record and save connection
data; these data can be analysed us-
ing a number of individually config-
urable filter criteria. For further in-
formation, refer to the web console
online help.
You can connect two OpenCom 510
systems (PBX cascading). Cascading
is a simple way of increasing the
number of terminals that can be
connected.
As your communication require-
ments grow, the OpenCom 510 can
be networked with other telecom-
munications systems. The
OpenCom 510 can then operate as a
sub-system or as a DECT server. It is
also possible to create a telecommu-
nications system with several net-
worked PBXs.
Internet Access
For the purpose of providing Inter-
net access, PCs can be connected to
the OpenCom 510 by means of the
internal S
0
ports, and an entire LAN
can be connected by means of the
Ethernet port. If Internet access is al-
ready available from an Internet
service provider, the OpenCom 510
can be configured accordingly. The
OpenCom 510 can also be used for IP
configuration if there is no IP-capa-
ble client network. An integrated