21
Installation
Installation in a 19" Rack
Installation in a 19" Rack
OpenCom 510: 1-12 frame mounting points
The OpenCom 510 is designed to be
installed in 19" racks only.
The following mounting points for
installation in a 19" rack can be
found on the 1-12 frame:
Note:
If the OpenCom 510 is to be
used as a wall-mounted instead of a
floor-standing system, it must be in-
stalled in a standard-type wall-
mounted enclosure using 19" mount-
ing technology.
B
A
C
1
2
C
Legend
1
Left mounting bracket
2
Right mounting bracket
A
Mounting bracket screw bolts for
front mounting (approx. 132 mm)
to the uprights of the 19" rack
B
Mounting bracket screw bolts for
mid-mounting (approx. 400 mm)
to the uprights of the 19" rack
C
Left and right screw points for
earthing wrist strap or circuit
common connection between
1-12 frame and 19" rack
Legend
Summary of Contents for OpenCom 510
