MZ‐4.433
Detecto Command Systems B.V.
Page 5
3: ENCODING
From the factory the transmitter has a unique code.
This code can be changed only by means of a second (compatible)
transmitter or by your supplier.
3.1: Learning a new code
The mini transmitter is code learning and has no code switches.
To learn a new code, a second mini transmitter (or compatible) is
required.
These two transmitters can be wirelessly paired.
To do this, follow these steps:
To the right of the fourth switch is a second switch (leerknop)
Press it and hold it down.
Then press one of the four function keys for which the code is to be
learned.
The transmitter LED starts flashing.
The transmitter is now in the 'learning mode'.
Now activate the function of the (second) transmitter whose code is to
be learned.
When the code is accepted, the LED goes out.
When the transmitter does not receives a valid code within 5 seconds,
the transmitter leaves the 'learning mode' and the LED goes out.
To prevent the transmitter learns a strange signal, the range is very
limited.
Both transmitters should therefore lie side by side.
