2
GLASS DIGITAL SCALE
MODEL D121
Congratulations! You have purchased a precision health monitoring product that should provide you
with years of accurate use. To assure you obtain the best performance please read the following set-
up and use instructions carefully before using the scale.
Imporant:
General Operation
1. Use 2 AAA batteries (included. Remove any plastic wrap from the
batteries before proceeding). Always replace all batteries at the
same time; do not combine old and new batteries. Do not mix
Alkaline, carbon-zinc (standard) or Nickel-Cadmium
(rechargeable) batteries.
2. Open the battery compartment on the bottom of the scale.
3. Place the batteries into the battery compartment according to
the “+” and “-” polarity symbols in the compartment. (figure 1)
4. Replace the battery compartment cover.
5. Replace all the batteries if “LO“appears on the screen or if readings grow dim or irregular.
1. The maximum capacity of this scale is 440 lbs / 200 kgs / 31 ST 6lbs. Should “O-Ld” appear
on the display during a weighing, this indicates that the maximum weighing capacity of the
scale has been exceeded. Remove the weight immediately; otherwise, permanent damage
may occur.
1. Install 2 AAA batteries (please read “Battery Installation” section
of this manual for battery installation instructions).
2. Your scale has been set at the factory to read weight in pounds.
Select the weight unit wants among kg/lb/st. Button is located on
the back of the scale. Press button to switch between
kg/lb/st. (figure 2)
3. Place scale on flat, hard surface. Carpeted or uneven floors may
affect accuracy. (figure 3)
4. Step on the scale (disregarding the reading) and step off. This
process insures the scale is set and is now ready for use. Do
this whenever the scale is moved. At all other times step
straight onto the scale.
5. Step onto the scale platform and remain still. The display will
count up to your weight. The display will flash twice when the
weight is locked. Your weight is now displayed.
BEFORE USING THIS SCALE—PLEASE READ
fig1
fig4
fig3