Switch, Key name, Indicator and Function
1. POWER Switch
The power switch is used to turn the printer On or Off
2. (FEED) Key
Press the FEED button to advance paper or hold down to feed continuously
3. (STATUS) Green Light
If the STATUS light is off, this indicates that the printer is in normal working
state.
If the STATUS light is flashing, this indicates that the printer is short of
paper, print head overheating or error and other abnormal conditions.
4. (POWER) Red Light
The indicator light indicates the printer is connected to the power supply
and is turned on.
5. Self-Test of Printer
Make sure the printer is power off before performing this task. Press and
Hold the FEED button and then power on the printer. Release the button
within 2-5seconds to print the self-test page
6. Restore Factory Settings
When the printer connected to the power adapter, press (feed) key and
open the printer power at the same time, released the button after
approximately 10 seconds, printer is restored to factory settings.
MAINTENANCE
1. How to clean the Printer: Use a wet cloth; gently wipe the printer surface
and internal paper warehouse.
2. How to clean the Printer Core: Dip a cotton in anhydrous alcohol and
gently wipe the printer core ceramic parts
3. In case of water spill, please immediately disconnect the printer power,
and allow the printer to dry naturally. Do not expose to direct sunlight.
