Walkstation
User Instructions
THIS IS NOT AN EXERCISE MACHINE. Read and follow all manufacturer’s
instructions for the proper use and operation of the Walkstation and adjustable
height worksurface before initial use of this worksurface. Failure to follow
these instructions at any time could result in serious personal injury.
To Start the Walkstation:
Review all precautions prior to using the Walkstation.
When ENTERING the workstation area, and before operating the Walking Platform:
• Ensure that the Walking Platform switch is in the ON position
but belt is
not moving
;
• Straddle the Walking Platform belt by standing on stationary side straddle
covers and adjust the worksurface to desired height;
• Never adjust the worksurface height while Walking Platform is moving;
• Attach the Magnetic Safety Clip to your clothing near the center of your body,
just below worksurface level, attach other end to the magnetic reciever on
the console keypad;
• For your personal safety, the Magnetic Safety Clip must remain attached
to your clothing while the Walking Platform is in operation;
• Use
and
to adjust setting to your proper weight. Press ENTER.
• Press START button. The treadmill will beep three times and then start
at 0.3 mph. To adjust speed, use FAST
and SLOW
keys.
When Exiting the Walkstation Area:
• Do not allow Walking Platform belt to remain running while
workstation is unoccupied.
• Stop the Walking Platform by pushing the STOP button on control panel;
• Wait for the belt to stop moving;
• Remove Magnetic Safety Clip from your clothing and exit the workstation.
Using the Worksurface and Treadmill Controls on Console:
Worksurface
• Height Adjustment –
Worksurface up
Worksurface down
–
+
–
+
W
A
R
N
I
N
G
W A L K S T A T I O N
U S E R
I N S T R U C T I O N S
8
WS_Instructions_TroubleShooting:Layout 1 1/7/10 10:57 AM Page 8
