4
4a
4c
Page 3 of 4
20467301 Rev A
CAP
PLATE
TRAY
ASSEMBLY
4d
4b
MONITOR
MOUNT
RAIL
ASSSEMBLY
YES
NO
End View
NOTE:
Push upward on
plate so screws are against
bottom of oblong holes
Remove components as
shown (4a) Remove
existing monitor mount rail
assembly (4b).
Slide tray assembly into rail
(4c).
Re-install plate, screws
and cap (4d). When
installing the screws, insert
screws oblong holes in
plate making sure the
screws are against the
bottom of the oblong holes
instead of the top.
This will ensure that the
rectangular tabs on the
inside of cap will fit properly
into the rail.
PLATE
PLATE
