6
Construction
The LCC series oven has a type 304-2B stainless steel interior. All interior seams are
continuously welded on the insulation side. This protects the work chamber from
contaminated air and permits chamber washing without damaging the insulation.
Interior chamber walls and silicon door gaskets (Viton Fluorocarbon on NV models) can
be easily removed for cleaning. Heater frame, fan wheel and motor shaft are
constructed of stainless steel.
Exteriors are steel finished in SilverClay enamel, baked to a 2H hardness for chip and
scratch resistance. All controls are mounted on the front of the oven for easy operation
and readability. Two electropolished stainless steel wire shelves are provided. The
shelves are removable and adjustable on two inch centers.
Cooling
Air models have an adjustable fresh air damper which allows cooling of the oven.
Nitrogen models have a stainless steel water coil. When used in conjunction with the
optional flowmeter the cooling coil permits rapid cooldown and low temperature
operation.
Inert Atmosphere
An inert atmosphere option offers the advantages of both a clean room oven and inert
atmosphere oven. The nitrogen portion for the LCC series oven includes a manual
three way valve and two flowmeters, connected by piping to the inlet connection on the
lower back panel marked nitrogen supply.
