EN
Service
12/2020
11 / 16
Service
Maintenance Instructions
Read before maintenance
WARNING Connection Hazard
The tool can start unexpectedly and cause severe bodily injury.
►
Prior to any maintenance task, disconnect the tool.
Maintenance should be performed by
qualified personnel only
.
Follow standard engineering practices and refer to exploded views for disassembling and reassembling the different
parts of the system.
Take into account the following instructions given in the exploded views.
Be cautious: when reassembling, tighten the right direction.
Left hand thread
Right hand thread
When reassembling:
Apply the recommended glue.
Tighten to the required torque.
Lubricate with the required grease or oil. Do not apply too much grease on gears or bearings; a thin coat shall be
sufficient.
Preventive Maintenance
Heavy duty
Heavy duty use can require more frequent overhaul and Preventive Maintenance intervals. Please contact your local
Desoutter Service team to get a customized maintenance plan.
Recommendations
Overhaul and preventive maintenance is recommended at regular intervals once per year or after a maximum number
of drilling cycles (refer to the table below) depending on which occurs sooner.
Maintenance frequency
500,000 drilling cycles
Upgrading tool firmware
Contact your Desoutter representative to get the last version of firmware (.zip file).
The firmware version of the tool is displayed in the screen
Tool configuration
.
Copy/paste the .zip file at
C:\Program Files (x86)\Desoutter\XPB Config
(directory by default) .
Go to the tab
Tool maintenance
.
Click
Select zip file
.
Select the file and click
Open
.
Click
Update
.
Green, blue and red light indicators are blinking. When the blue LED switches off, the upgrade is done.
Do not remove the battery pack while upgrading.
