Desoutter EABS12-1100-10S, Product Instructions, Page: 17 / 24

EN Operation
01/2020 17 / 24
Select how the tool goes into deep-sleep mode .
Set the time to 0 to keep the communication always active. The tool will never power off.
Set the time between 5 and 99 minutes.
Click this icon to update the tool.
If the transfer fails, unplug and plug the battery pack. Re-start the transfer.
How to set up the Pset
Pset 1 is the onlyPset to transfer to the tool.
In CVI CONFIG, click "Psets" and select
1 - Pset
.
Change the parameters of this Pset as you like.
For example:
Refer to the user manual of CVI CONFIG available at https://www.desouttertools.com/resource-centre .
Click this icon to update the tool.
If the transfer fails, unplug and plug the battery pack. Re-start the transfer.
How to read the tool status
1 LED showing the tool status
The LED is not lit. The synchronization with the system is required.
The tool is not allowed to run the tightening process.
The LED is blinking blue at a regular frequency. The synchronization with the system is in progress.
The tool is not allowed to run the tightening process.