9 / 40
11/2017
6159920990_03
English
Original instructions.
© Copyright 2017, Ets Georges Renault 44818
St Herblain, FR
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.
STATEMENT OF USE
This product is intended to drive, monitor and
control the following Desoutter range of tools.
- ELC screwdrivers
- DWT torque wrenches
- DWTA torque and angle wrenches
No other use is permitted.
For professional use only.
TECHNICAL DATA
Input voltage
9-30 V
The external power supply
shall provide:
-
the input voltage filtered
and regulated (SELV
stands for safety extra
low voltage).
- the circuit with a non-
dangerous energy level.
Input current
0.25 A - 0.3 A
Weight
550 g
IP rating
54*
Using Temperature Min.
0°C
Max.
45°C
Wireless protocol
802.15.4 standard
Default serial communication:
Baud rate
19,200 Baud
Parity
none
Data length
8
Stop bit
1
* All connectors and cap must be properly
connected.
●
Contact your local Desoutter
representative for more information.
OPTIONAL ACCESSORIES
-
E-LIT BOX V2 power supply
100-240 VAC to 24 VDC power supply with
interchangeable AC plug
Part number: 6159270530
-
E-LIT BOX simulator
Reporting box with leds and push buttons
Part number: 6159290490
INSTALLATION
●
●
Connect the antenna.
● Switch off the 24V power supply
and the PLC before installing the
module.
All dimensions are in mm.
A
WALL MOUNTING
●
Secure the module by using 4 screws (not
supplied in the box).
B
MOUNTING ON DIN RAIL
●
Mount the module in vertical position, the
connectors being directed to the bottom.
●
Clip the module on the rail.
C
E-LIT BOX V2 CONNECTORS
1 24 V power switch
2
J1 M12 male connector
24 V power supply and digital inputs
3
J2 M12 female connector
Digital outputs
4
USB port.
When the USB port is not used, put the
plastic cap instead.
D
J1 CONNECTOR
1
24 V
Power supply 24 V
2
0 V
Power supply 0 V
3 INCOM
Common of inputs 1 to 4
4 OUTCOM Common of outputs 1 to 8
5
IN1
On pulse, the tool is locked
