manualshive.com logo in svg

Desoutter 6151660870, Product Instructions, Page: 17 / 28

Share
Download
Desoutter 6151660870 Product Instructions Download Page 17

EN

Operation

08/2020

17 / 28

How to change network parameters

Via CVIMONITOR and eDOCK

Refer to chapter 

How to connect the tool to CVIMONITOR [Page 14]

.

Click this icon.

Click this icon to display the current parameters of the tool.

Change the parameters.
Refer to chapters 

Default tool Ethernet configuration [Page 9]

 and 

WI-FI settings [Page 10]

.

Check that IP address, subnet mask and port number of the controller/hub are compatible.

Click this icon to write the new parameters into the tool.

Via Easy Pairing

When the pairing is done to CONNECT via RFID, WI-FI settings are directly written to the tool.

Network settings must have been done previously by using CVI CONFIG.

How to read the tool status

1

LED showing the tool status

The LED is not lit.

The synchronization with the system is required.
The tool is not allowed to run the tightening process.

The LED is blinking blue at a regular frequency.

The synchronization with the system is in progress.
The tool is not allowed to run the tightening process.

The LED is blinking blue twice at a regular frequency.

The tool is synchronized with the system but locked.
The tool is not allowed to run the tightening process.
Go to the system, press the icon "STOP" to visualize the rea-
son why the tool is locked.

The LED is steady blue.

The tool is ready to run the tightening process.

Operating Instructions

Starting the tool

Fit the tool with a suitable socket.

Select the appropriate program on the system.

Hold the tool by means of the handle and apply to the fastener to be tightened.

WARNING Risk Of Injury

As the reaction force increases in proportion to the tightening torque, there is a risk of severe bodily injury of the
operator as a result of unexpected behavior of the tool.

►

Make sure that the tool is in perfect working order and the system is programmed correctly.

Summary of Contents for 6151660870





























Reviews:

No comments