EN
Operation
07/2020
19 / 32
Icon status
Description
Pset 2 is the next Pset to run.
The tool is ready to start.
There is no Pset selected.
The tool is locked.
Select a Pset.
Pset 4 is selected.
The tool is locked.
The tool may be expecting an external order.
How to select the Assembly Process to run
Go to CVI CONFIG.
Check that:
"Running mode" in the configuration of the Tightening Unit is set to "Assembly Process".
Start condition of the Assembly Process is set to "Tool display".
From the tool main screen,
press and hold
the right button.
Press OK. The Assembly Process number turns orange.
Use the left or right button to scroll the list.
Press OK to select the displayed Assembly Process. The number is now in blue.
Once the Assembly Process is selected and the tool ready, the Pset number turns green.
Press the trigger to start the process.
Starting the tool
Fit the tool with a suitable socket.
Select the appropriate Pset.
Hold the tool by means of the handle and apply to the fastener to be tightened.
WARNING Risk Of Injury
As the reaction force increases in proportion to the tightening torque, there is a risk of severe bodily injury of the
operator as a result of unexpected behavior of the tool.
►
Make sure that the tool is in perfect working order and the system is programmed correctly.
Press the trigger to start the tool.
Tightening status and LED reporting
Reporting LEDs
1
Red
2
Green
3
Yellow
How to read the tightening report
LED color
Description
Action to do
Green
Accept report
None