background image

6159920260_05_

25 / 76

04/2015

English

C

LEDS COLOR CODE

1. Red

2. Green

3. Yellow

The battery pack and the battery charger 

are delivered in separate boxes. Please 

ensure you have well received these 

boxes and check the contents.

INSTALLATION

Insert the battery pack.

There is no ON/OFF switch: the tool is ready

to operate as soon as a loaded battery pack

is mounted.

Unplug the battery pack when the tool

is not used.

Do not leave the battery pack on the

charger when the charger power supply

is off.

OPERATING MODE

When the tool is powered on, the Desoutter logo 

is displayed and the LEDs are blinking.

Wait for a few seconds while the software is

being initialized.

● Refer to the user manual 6159921020 (ExB) /

6159921150 (ExBA) at http://resource-center.

desouttertools.com to learn how to set up

and use the functionalities of the software

embedded in the tool.

MAINTENANCE INSTRUCTIONS

Maintenance should be performed by qualified 

personnel only.

Prior to any maintenance task, disconnect the

tool.

Overhaul and preventive maintenance 

is recommended at regular intervals 

once per year or after maximum 500,000 

tightenings depending on which occurs 

sooner.

Assembly and disassembly

When disassembling the tool electronics, take

extra care for the wires when pulling out the

connectors.

When disassembling the tool front assemblies,

take care for the torque transducer wires.

Follow standard engineering practices and

refer to figures/exploded view for the mounting

of component subassemblies.

Prior to putting the equipment back into

service, check that its main settings have not

been modified and that the safety devices 

work properly.

Meaning of the pictograms

Left hand thread

When reassembling, apply the 

recommended glue
When reassembling, tighten to the 

required torque

When reassembling, lubricate with the 

required grease or oil.

Lubrication

Do not apply too much grease on gears or

bearings; a thin coat shall be sufficient.

The use of spare parts other than those 

originally supplied by the manufacturer 

may result in a drop in performance or 

in increased maintenance and level of 

vibration and in the full cancellation of the 

manufacturer’s liability.

According to Directive 2012/19/

CE concerning Waste Electrical and 

Electronic Equipment (WEEE), this 

product must be recycled.

Contact your Desoutter

representative or consult the website

"www. desouttertools.com" to find out

where you can recycle this product.

Summary of Contents for 6151658990


























Reviews: