This Manual is applicable to the
Revised May 11st 2016
De Sisti SUPER LED F7
Pag 4
.
BECOME VISIBLY DAMAGED TO SUCH AN EXTENT THAT THEIR EFFECTIVENESS IS
IMPAIRED, FOR EXAMPLE BY CRACKS OR DEEP SCRATCHES.
•
THE LUMINAIRE SHALL ONLY BE USED COMPLETE WITH ITS PROTECTIVE SHIELD
D. Applying power:
Never connect to dimmer power. Install a power plug on the power cable using the following pin assigment:
1 : Neutral 2 : Live Green/Yellow : Ground - This fixture must be connected to ground.
Make sure the local power voltage is within the range specified. If so; connect the power cable and turn the
power on.
E. Stand Alone operation:
Using the navigation buttons and display readout (
refer to the “Local Menu” chapter)
navigate to Manual and set the desired intensity (for
additional operations see “Local Menu” chapter)
F. DMX operation:
Connect a DMX cable
Navigate to Address mode (Addr) and set the desired address, (refer to the “Local Menu” chapter).
Connect to DMX controller (
refer to the “Channel Setting” in the “Local Menu” chapter) and Use it.
6. LOCAL MENU
PGM PORT
For Firmware Upgrade
FUNCTION 1
Scrolling UP
/ Increases value “function key”
ENTER
Select / Confirm
FUNCTION 2
Scrolling DOWN / Decreases value
“function key”
Display
When the push buttons are not used for more than 15
seconds the display will go OFF. It will go ON again
anytime a push button is activated.
DMX Presence
Shows the presence of DMX (LED lit = DMX present)
DEFAULT SETTINGS ARE INDICATED IN BOLD LETTERS ON THE FOLLOWING TABLE:
The following are the BASIC FUNCTIONS and COMMANDS that are provided on the LOCAL MENU of the LED
FRESNEL. The unit is provided with a USER MENU accessible instantly on the product.
The unit has also a SERVICE MENU that is only accessible through a PASSWORD and is reserved for QUALIFIED and
TRAINED PERSONNEL:
1st MENU
Displayed
(
scrolling with the
and the
buttons)
2nd MENU
Displayed
(after pressing the
X
that stands for
ENTER
)
Explanation of Each MENU FUNCTION
