20094/20994 Page 7
Page 6 20094/20994
3.
Horn-vs-Siren
(Factory setting is Horn)
This product gives you the option of having a pulsed output for a car horn or a
constant output for a siren.
This section will set or reset any of the three options.
1)
Push the red button on the side of the case of the receiver and the red LED
will flash once letting you know you are in option 1. Push the red button
again to scroll to option 2 (the LED will flash twice) and again for option 3
(the LED will flash 3 times) -- then back to option 1 again if necessary.
2)
When you are at the option you want to change -- simply press the Middle
button on the transmitter to choose the function you want. After a few sec-
onds of holding the transmitter button down -- the red LED on the receiver
will flash once indicating you've set the optional setting or twice indicating
you've returned to the factory setting.
3)
The unit will exit out of programming in 5 seconds by flashing the LED 3
times.
Follow the chart below and on the next page to set the features desired:
Option 1 — Lock Follow Ignition:
This option will lock the doors 2 seconds after the key is inserted into the ignition, and
will automatically unlock the doors when the key is removed from the ignition.
Factory (2 Flashes)
Option (1 Flash)
No Lock Follow Ignition
Lock Follow Ignition
Option 2 – Single Pulse / Double Pulse locks:
This option gives a double pulse to the Locks and Unlocks.
Factory (2 Flashes)
Option (1 Flash)
Single Pulse Locks
Double Pulse Locks
Option 3 — Horn-vs-Siren:
This gives an option for pulsed output for a horn or a constant output for a siren:
Factory (2 Flashes)
Option (1 Flash)
Horn Output
Siren Output
13. PROGRAMMING OPTIONS:
There are 3 options which can be changed
1.
Lock Follow Ignition
(Factory setting is "No Lock Follow Ignition")
This option will automatically lock the doors 2 seconds after the car is started, and
will automatically unlock the doors when the key is removed from the ignition
2.
Single Pulse / Double Pulse Locks
(Factory setting is Single Pulse)
This option gives a double pulse to Lock and Unlock the doors. The double
pulses are seperated by 1 second.
12. TRYING OUT THE UNIT:
Always keep one window rolled down to avoid locking yourself out of the vehicle.
Your transmitter has already been factory coded to the
Smart Entry
tm
. (If it does not
trigger any of the following functions, and you have already checked your connec-
tions, follow the steps for Transmitter Code Learning at the end of the manual.) Gener-
ally, the transmitter button should be held down until the
Smart Entry
tm
unit re-
sponds with the desired feature.
Button 1: Hold for one second -Lock (One chirp, One light flash)
Again:
Hold for one second -Unlock (Two chirps, Two light flashes)
Hold for four seconds -Unlocks and opens Trunk
Button 2: Hold for One second -Car Locator (Brief Horn/Siren sound)
Hold for four seconds -Panic Alarm (45 second horn/alarm
sound)
Button 3: Hold for one second -Turns the Lights on for 25 seconds
Again:
Hold for one second -Turns the Lights off
NOTE: If the Panic Alarm is sounding -- Button 2 held for 2 seconds will
turn off the Panic Alarm or the Panic Alarm will automatically
silence after 45 seconds.
