Page 10 20620
Page 11
20620
Step 11
Try Out The Alarm
Now everything is complete and it is time to try out the system.
•
Press button #3 (yellow) and the headlights should come on. They
will turn off in 30 seconds -- or you can turn them off by pressing
the YELLOW button again.
•
Press button #2 (red) for 1-2 seconds to get the CarFinder
®
fea-
ture. The siren will sound for 1-2 seconds and the lights will flash.
•
Press and hold button #2 (red) for 3 seconds to get the Panic mode.
The alarm will sound and the lights will flash for 30 seconds. You
can turn off the alarm by pressing the RED button again.
•
With the car running, press and hold button #2 (red) for 3 seconds
to try the Carjacking mode. The alarm will wait one minute and
then go off until 55 seconds after the car is turned off.
•
Press button #1 (green) for 1 second. You will hear one chirp
signifying that the alarm is now armed. Open the car door and the
current draw caused by the interior dome light coming on will set
off the car alarm. Hold down button #1 (green) for 2 seconds to
turn off the alarm. Push the left button again to re-arm the system.
This time, hit the vehicle with your fist to simulate a thief breaking
into your car - and test out the shock sensor mode. Again, turn off
the alarm by pressing button #2 (red) for 2 seconds.
•
Please note that any radio frequency type product is subject to many
conditions including interference from other products. "Line-of-
sight" range should be up to 400 feet in front of the vehicle, but
will be less from different angles of the vehicle and under other
conditions (such as being inside a building or other structure, or
being in a high radio interference area).
3) When you have settled on a proper sensitivity level, simply press
button #3 (yellow) to exit programming mode and save this sensitivity
level. If you don't press any buttons for 5 seconds, you will automati-
cally exit the programming mode.
Step 10
Choose Siren Sound
You can personalize your alarm's sound by selecting one of eight dif-
ferent siren sounds..
TO ENTER PROGRAMMING MODE:
1) Press buttons one and two simultaneously
for 2-3 seconds. You will hear the alarm for
one second and then 3 rapid chirps; let go of
the buttons only after you have heard the con-
firmation chirps or you will not enter the pro-
gramming mode! Once you have heard the
confirmation chirps you are ready to program
your shock sensitivity or your siren sounds.
2) Press button #2 (red) to enter the siren
sound selection mode. By pressing the RED
button in the siren sound selection mode, you
can scroll through the various siren sounds
until you find one you like (you will hear 2
seconds of the selected siren sound each time
you scroll to a sound).
3) When you have settled on a favorite sound,
simply press button #3 (yellow) to exit pro-
gramming mode and save the last sound
played. If you don't press any buttons for 5
seconds, you will automatically exit the pro-
gramming mode.
Press these at the
same time, for 2-3
seconds, to enter
programming mode
